although 'er indoors says its a tear drop.
About 4" high. made from iroku and beech
pear shaped
-
sunnybob
- Registered User
- Posts: 235
- Joined: Thu Feb 18, 2021 12:42 am
- Location: Cyprus
- Been thanked: 265 times
pear shaped
You do not have the required permissions to view the files attached to this post.
My projects are here;
https://pbase.com/sunnybob
https://pbase.com/sunnybob
-
Herb Stoops
- The Welcome Wagon
- Posts: 3054
- Joined: Mon Oct 05, 2020 8:05 pm
- Location: Auburn WA.,USA
- Preferred name: Raff
- Has thanked: 1484 times
- Been thanked: 876 times
Re: pear shaped
Real nice work, Bob. Does it taper from front to back or are those 2 separate feet in the back? Do you do those fine boxes on the bandsaw,or scrollsaw?
Herb
Herb
-
sunnybob
- Registered User
- Posts: 235
- Joined: Thu Feb 18, 2021 12:42 am
- Location: Cyprus
- Been thanked: 265 times
Re: pear shaped
Pictures of the back and underneath......
I use a bandsaw Herb, tried scroll saws but I dont have the patience for them. And a bobbin sander to do all the hard work for me.
On this one I left the back panel off to cut everything out and sand the teardrop shape. Once that was smooth, I glued on the square rear panel, cut off most of the excess on the bandsaw, then the bobbin sander again to blend the curves to the back stand.
On this one I left the back panel off to cut everything out and sand the teardrop shape. Once that was smooth, I glued on the square rear panel, cut off most of the excess on the bandsaw, then the bobbin sander again to blend the curves to the back stand.
You do not have the required permissions to view the files attached to this post.
My projects are here;
https://pbase.com/sunnybob
https://pbase.com/sunnybob
-
Herb Stoops
- The Welcome Wagon
- Posts: 3054
- Joined: Mon Oct 05, 2020 8:05 pm
- Location: Auburn WA.,USA
- Preferred name: Raff
- Has thanked: 1484 times
- Been thanked: 876 times
-
Herb Stoops
- The Welcome Wagon
- Posts: 3054
- Joined: Mon Oct 05, 2020 8:05 pm
- Location: Auburn WA.,USA
- Preferred name: Raff
- Has thanked: 1484 times
- Been thanked: 876 times
Re: pear shaped
Herb Stoops wrote: ↑Sat Oct 07, 2023 10:51 pm Oh my, I never thought of making the feet like that, great job. I can't see where you entered with the bandsaw.
Herb
-
Cherryville Chuck
- Global Moderator
- Posts: 2648
- Joined: Mon Oct 05, 2020 8:27 pm
- Location: Cherryville, B C
- Has thanked: 561 times
- Been thanked: 1011 times
Re: pear shaped
Teardrop and pear both sound better than kidney. Nice. One of the benefits of using beech with something dark colored is that the beech doesn't compete with it.