Workers Of Wood

@Velosimpson@Planeandchisel,rpmer9,
Welcome all of you to the Forum. To get started there is a small triangle by your name above ,click on that and you will see drop down menus to complete your information. We request a short introduction about the tools you use and your level of experience so if you have any questions we can gear the answers to suit you. We love to see pictures of your work and how you did it, everyone learns new things.
Have fun browsing and we are happy you joined us.
Herb

@SecondShiftWoodworks
Welcome to the forum, You will find a friendly group of wood workers here to help you with any woodworking problems you have or to show your work. We welcome all levels of WW and don't be afraid to post pictures of your projects or tips you use to make things. It helps us answer any questions you might have to tell us a little about your shop and experience.A short introduction will help too and a name you want to go by. Have fun browsing, and feel free to post any comments to other posts.
Herb

We're still pretty new at this so please, jump right in, and Welcome!

Welcome to the Forum...!

@Stick486
Welcome Back Ole buddy, good to see you again we all missed you greatly, sorry if we pissed you off the first time around. It wasn't the same without you here. We have tried to not stray too far without your guidance.
Herb

YIPPEE-YAY...! ! ! He's Baaack...!

Herb Stoops wrote: ↑Thu Jan 21, 2021 7:51 am We have tried to not stray too far without your guidance.

.
uh-huh...

Nickp wrote: ↑Thu Jan 21, 2021 7:55 am If it ain't broke, don't fix it til it is !

we'll see...

You must have finished moving by now and have started to settle in on the new version of normal. Good to see you back.

Cherryville Chuck wrote: ↑Thu Jan 21, 2021 11:30 am You must have finished moving by now

Not even close...

Cherryville Chuck wrote: ↑Thu Jan 21, 2021 11:30 am normal

seriously???

thanks for the welcome...

G’day Stick great to see you back.

old55 wrote: ↑Thu Jan 21, 2021 6:39 pm great to see you back.

thanks Ross but are you sure about this....

Stick!!!!!

Stick486 wrote: ↑Thu Jan 21, 2021 7:46 pm

old55 wrote: ↑Thu Jan 21, 2021 6:39 pm great to see you back.

thanks Ross but are you sure about this....

Yep.

old55 wrote: ↑Thu Jan 21, 2021 11:49 pmYep.

oh-tay...

Good morning my friend, I see you are up early as usual.
Did you get started on those planes?
That should keep you busy for a while.

Bushwhacker

mornin' Dave...
thanks fer the welcome...
be a while before there's shop time...
have to build one yet....

@Pmhandyman
Welcome to the forum, Phil, Click on your Name at the top of the screen and you can set your profile and avatar.
We are glad to have you as a new member and a little introduction,to give us an idea of your shop and tools and experience would help us to answer any questions you might have. Feel free to browse the forum and enter into discussions or ask questions.
Herb

@Pmhandyman
Welcome Phil...

@Pmhandyman

Welcome, Phil...you're gonna like it here...jump right in...

Nickp wrote: ↑Fri Jan 29, 2021 4:35 pmjump right in...

and he doesn't even need to know how to swim or have to have a parachute...

@Pmhandyman

Welcome to the forum.

@Pmhandyman
Welcome to the forum

@ROENTGEEP-2 Welcome to the Forum, Joe. Up on the right hand corner there is a little triangle,click on that and menus will drop down where you can fill out your profile and add an avatar. A little introduction is nice to let us know what your interest are and maybe what tools you use so we have an idea of how to answer any questions you might have. We are all levels here and a friendly group. Have fun browsing the different topics. Feel free to add to any on going topics.
Herb

Thank you Raff for the welcome, as for the message from Nick. Im are a little confused with the new format, but Im learning how to work with it. I like to see several friends here from the other forum. I ask mercy for my bad English. but as you know Im from the south (MEXICO). BTW, Im here mainly for my AMIGO Stick, he told me about this forum, and Im here.

Best regards to all of the members.

Welcome to our little corner of the "world"...You'll be very happy here among your old friends...glad you made it.

@LabRat Welcome to the forum. we are happy you joined our little group. By your Avatar you must be a part of the SNORK Mountain Academy . Feel free to browse and comment on any of the threads. An old timer like you must have lots of stories to tell. If you need help with anything just holler.
Herb

Herb Stoops wrote: ↑Fri Feb 19, 2021 1:36 am If you need help with anything just holler.

I could use some help convincing her to leave the lid up...

To solve the problem, just remove the lid. You don't need to thank me for the help,I was just happy to give you advise. Next............
Herb

Herb Stoops wrote: ↑Fri Feb 19, 2021 12:43 pm To solve the problem, just remove the lid.

GOOD PLAN!!!!
I did tell her that shouldn't be any problem because she was wide enough that she needn't to worry about falling in....

Oh, You are gluten for punishment.
Herb

Herb Stoops wrote: ↑Fri Feb 19, 2021 2:35 pm Oh, You are gluten for punishment.
Herb

it comes w/ the silent treatment...
no nagging...

thanks HErb...

Herb Stoops wrote: ↑Fri Feb 19, 2021 1:36 am An old timer like you must have lots of stories to tell.

this being a family forum puts the damper on that...

Herb Stoops wrote: ↑Fri Feb 19, 2021 1:36 am If you need help with anything just holler.

preparing the list...

@boogalee
Welcome to the forum, good to see you again, you know most of the current members and we all welcome you. If you have any problems navigating the forum, just speak up. Have fun browsing and posting comments.
Herb

Welcome to the forum @boogalee

@Erod
Welcome to the forum, Erod,We are glad you joined our friendly forum. Consider posting an introduction so we know a little about your woodworking experience, shop, and tools. This helps us to answer any questions you might ask. In the upper right by your name click and a menu will drop down for you to set your Profile and avatar. Just ask if you need help. We are anxious for you to join our conversations. Have fun browsing and posting.
Herb

@Wildwood
Welcome to the forum, we are happy to see you here. You can fill in your profile by clicking the little arrow up in the right hand corner of the page by your name.This also allows you to set your Avatar . We like to request you tell us a little about your experience and tools. We are all level of wood workers here on this friendly forum, so jump right in and browse and post. If you need any help using the forum, just ask and someone will help you out.
Herb

@Wildwood

Welcome to the forum.

@CRW,@Zchild,@macminn18 ,
Welcome to the forum, we are happy you joined our forum and you will like it here. We are a friendly group and if you have a question about wood working just ask us we will help you solve your problem. Or if you just want to offer advice to help others, you are welcome to do so. It helps if you post a brief introduction so we have an idea of your skill level and the tools you have to work with in your shop space. Also if you mention the general location you are located, there might be members close by to assist you.
There is a little arrow in the right hand top of page by your name,if you click on that it will open a window for filling in your profile and Avatar.
Herb

Welcome to the Forum...!