Here is how I made a pedestal out of Western Maple.
.
Making a Pedestal
-
Herb Stoops
- The Welcome Wagon
- Posts: 3054
- Joined: Mon Oct 05, 2020 8:05 pm
- Location: Auburn WA.,USA
- Preferred name: Raff
- Has thanked: 1484 times
- Been thanked: 876 times
Re: Making a Pedestal
You do not have the required permissions to view the files attached to this post.
-
RainMan
- Registered User
- Posts: 183
- Joined: Mon Jan 10, 2022 8:10 pm
- Location: Cranbrook BC
- Preferred name: Rick
- Has thanked: 56 times
- Been thanked: 48 times
Re: Making a Pedestal
Great job Herb, you sure do nice work . Sure wish I was your neighbour, so I could learn from a pro . Exchange knowledge for beer lol
I don’t always insulate , but when I do .
Ok , I never insulate
Ok , I never insulate
-
Nickp
- Site Admin
- Posts: 1374
- Joined: Mon Oct 05, 2020 6:31 pm
- Location: Monroe County, PA
- Preferred name: Nick
- Has thanked: 533 times
- Been thanked: 352 times
Re: Making a Pedestal
Very nice...thanks for spending the time to get the pics in....
The fence on the router table seems far back...I'm guessing you ran the piece left to right...? I've needed to do that from time to time...
The fence on the router table seems far back...I'm guessing you ran the piece left to right...? I've needed to do that from time to time...
Don't piss off old people. The older we get the less "Life in Prison" is a deterrent !
-
Herb Stoops
- The Welcome Wagon
- Posts: 3054
- Joined: Mon Oct 05, 2020 8:05 pm
- Location: Auburn WA.,USA
- Preferred name: Raff
- Has thanked: 1484 times
- Been thanked: 876 times
Re: Making a Pedestal
Nick, the only way I could get the face profile like I wanted it, I was still cutting against the rotation of the bit.
Herb
-
Stick486
- CS/TS
- Posts: 20491
- Joined: Thu Jan 21, 2021 7:40 am
- Location: Central Colorado
- Preferred name: Stick486
- Has thanked: 657 times
- Been thanked: 580 times
Re: Making a Pedestal
WHOA!!! very nice...
compound rebated rabbets done to perfection... Way to go Herb....
How did you cut those long tapers???...
Your eye for book matching your panels is right on time....
what was your method to maintain your accuracy on the rest of compound joinery???
.
compound rebated rabbets done to perfection... Way to go Herb....
How did you cut those long tapers???...
Your eye for book matching your panels is right on time....
what was your method to maintain your accuracy on the rest of compound joinery???
.
KUDOS!!!
Forget the primal scream, just ROAR!!!
SNORK” Mountain Congressional Library and Taxidermy...
-
Herb Stoops
- The Welcome Wagon
- Posts: 3054
- Joined: Mon Oct 05, 2020 8:05 pm
- Location: Auburn WA.,USA
- Preferred name: Raff
- Has thanked: 1484 times
- Been thanked: 876 times
Re: Making a Pedestal
I used a taper sled jig to cut the long tapers.
The rebated rabbet was cut with a router bit,on the router table
I tried a lock miter and spent a lot of time setting up, but couldn't get it to come out perfect so went to the rabbet bit. I was able to book match the grains on 3 sides, but the 4th side had to to be what ever it was.
All the rest of the miters were cut on the table saw.
The architectural profiles were both cut on the router table with a couple of picture frame bits from the set of 4.
The finish is a coat of shellac and 2 coats of minwax clear polyurethane.
Herb
The rebated rabbet was cut with a router bit,on the router table
I tried a lock miter and spent a lot of time setting up, but couldn't get it to come out perfect so went to the rabbet bit. I was able to book match the grains on 3 sides, but the 4th side had to to be what ever it was.
All the rest of the miters were cut on the table saw.
The architectural profiles were both cut on the router table with a couple of picture frame bits from the set of 4.
The finish is a coat of shellac and 2 coats of minwax clear polyurethane.
Herb
-
HandyDan
- Forum Moderator
- Posts: 7051
- Joined: Mon Oct 05, 2020 7:44 pm
- Location: Youngstown, Oh
- Has thanked: 378 times
- Been thanked: 372 times
Re: Making a Pedestal
That looks fantastic Herb. Tapers add an elegance to pieces but I have not employed them to often.
HandyDan
Youngstown, Oh
Youngstown, Oh
-
old55
- Registered User
- Posts: 257
- Joined: Sun Nov 01, 2020 6:56 am
- Location: Rockhampton, Queensland, Australia
- Has thanked: 190 times
- Been thanked: 102 times
Re: Making a Pedestal
Looks great Herb.
Ross,
Rockhampton, Queensland, Australia
‘Enjoy the knowledge of others that can be found within.’
Rockhampton, Queensland, Australia
‘Enjoy the knowledge of others that can be found within.’
-
Cherryville Chuck
- Global Moderator
- Posts: 2648
- Joined: Mon Oct 05, 2020 8:27 pm
- Location: Cherryville, B C
- Has thanked: 561 times
- Been thanked: 1011 times
Re: Making a Pedestal
Beautiful Herb. Straight joinery would be impressive enough but when you add the taper to the equation is much more difficult.
-
Herb Stoops
- The Welcome Wagon
- Posts: 3054
- Joined: Mon Oct 05, 2020 8:05 pm
- Location: Auburn WA.,USA
- Preferred name: Raff
- Has thanked: 1484 times
- Been thanked: 876 times
Re: Making a Pedestal
Chuck, Now you tell me, I thought that all pedestal were tapered to give them stability having a larger footprint than the top.
But I will take the compliment anyway.Thanks.
Herb
But I will take the compliment anyway.Thanks.
Herb
-
Cherryville Chuck
- Global Moderator
- Posts: 2648
- Joined: Mon Oct 05, 2020 8:27 pm
- Location: Cherryville, B C
- Has thanked: 561 times
- Been thanked: 1011 times
Re: Making a Pedestal
Some pedestals have feet like pedestal tables.They don't need to be tapered. Some are more like lecterns. If they have a small footprint they would need to be.