Workers Of Wood

Some of you have seen this before. The trick to making a box that is dovetailed on all 6 sides. The trick is to cut the dovetails so the ends of the sides have pins ,this allows the ends to be slid straight onto the box.
Herb

way cool Herb..
now to add a dovetailed inlay to all 6 sides...
have the inlays a much darker wood such as Ebony or Black Walnut...
or go another step and inlay the dark inlay so that it forms a border to say Beech or Birch...

The box would have all the sides dovetails and the insert would be pins on all sides.
Herb

Herb Stoops wrote: ↑Sun Feb 27, 2022 1:27 pm The box would have all the sides dovetails and the insert would be pins on all sides.
Herb

step the dovetails as half blind half laps...

Stick, I am not familiar with those.
Herb

Stick486 wrote: ↑Sun Feb 27, 2022 1:20 pm way cool Herb..
now to add a dovetailed inlay to all 6 sides...
have the inlays a much darker wood such as Ebony or Black Walnut...
or go another step and inlay the dark inlay so that it forms a border to say Beech or Birch...

The local specialty wood store has some ebony for sale. A mere $350 per board foot. They fortunately only count the black part and not the white outer part when they measure. I was thinking of asking if they would cut me off a few board inches.

Herb dovetailing 6 sides sounds incredibly tricky.

Herb Stoops wrote: ↑Sun Feb 27, 2022 1:27 pm The box would have all the sides dovetails and the insert would be pins on all sides.
Herb

this style of pinned???
.

Herb Stoops wrote: ↑Sun Feb 27, 2022 2:23 pm Stick, I am not familiar with those.
Herb

. . .

That is beyond my pay grade.
I am still a beginner level. That must require on of those expensive jigs?
Herb

Cherryville Chuck wrote: ↑Sun Feb 27, 2022 2:27 pm

Stick486 wrote: ↑Sun Feb 27, 2022 1:20 pm way cool Herb..
now to add a dovetailed inlay to all 6 sides...
have the inlays a much darker wood such as Ebony or Black Walnut...
or go another step and inlay the dark inlay so that it forms a border to say Beech or Birch...

The local specialty wood store has some ebony for sale. A mere $350 per board foot. They fortunately only count the black part and not the white outer part when they measure. I was thinking of asking if they would cut me off a few board inches.

Herb dovetailing 6 sides sounds incredibly tricky.

Chuck, that amounts to $2.43/ sq. inch. But for 1/8" inlays, it might be OK.
Herb

Herb Stoops wrote: ↑Sun Feb 27, 2022 2:41 pm That is beyond my pay grade.
I am still a beginner level. That must require on of those expensive jigs?
Herb

nope...
machine cut the tails as you normally would...
machine cut the shoulders which gives you the thickness of the tail you need.. router or TS...
hand cut the half blind sockets...
if you are shouldering the socked piece, cut the shoulder 1st...

Cherryville Chuck wrote: ↑Sun Feb 27, 2022 2:27 pm The local specialty wood store has some ebony for sale. A mere $350 per board foot.

veneer to the rescue...

The reason I made that box was because an old Cabinet maker,(deceased) told me it couldn't be done and to forget about it.
I was thinking at the time of making my own coffin, and making it like that. If I left one end loose, they could just slide me in there and slam the end shut, with glue on it. Might keep the grave robbers from opening the coffin and stealing all my tools.
HErb

if you intend to use that box we're gonna have to run ya thru a compactor 1st...

This was just a prototype.
HErb

Ha! alternately, we can order one of these or those to Stick or Herb, according to whether we want round teeth splined pins or pigeon-hole tails, and the box may also include a midget inside who sings the national anthem of a different country every time we open it !
These, compared to what I can make, make me think of turning from woodwork to sewage plumbing for a hobby !!!
Guys, some of us are mere mortals, and life is a continuous school, but we need to practice what we learn before we graduate in the end!

Dimitri you are a philosopher with a good sense of humor.
Herb

DimitriM wrote: ↑Mon Feb 28, 2022 12:17 am These, compared to what I can make,

don't believe it...
from what we've seen of your work .... you can hold your own....

Herb Stoops wrote: ↑Mon Feb 28, 2022 12:27 am Dimitri you are a philosopher with a good sense of humor.
Herb

I like the midget idea...