Page 1 of 1

Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 1:36 pm
by Herb Stoops
These are my first attempts at Making band saw boxes. They aren't as purty as @sunnybob's but his are fine furniture, mine are rustic. They were from cut-offs of 4X12 Red Wood beams.
Herb

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 2:00 pm
by Stick486
Rustic.... Please...
these'll give anybody that does them a run for their money...

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 2:31 pm
by Cherryville Chuck
I agree. Not that rustic. It looks like you use a button or plugs to capture the wire in the hinges.

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 2:52 pm
by Herb Stoops
Cherryville Chuck wrote: Sun Feb 27, 2022 2:31 pm I agree. Not that rustic. It looks like you use a button or plugs to capture the wire in the hinges.
That is the Rob Cosman hidden hinge tech. Lee valley used to have the leadless wood pencil dowels, I bought a dozen and use them for my wood hinge boxes. The hinge pin is 5/32" wood dowel full length.
Herb

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 4:10 pm
by Herb Stoops
To make that hinge, you take a 3/8" ball/bull nose router bit and make a 1/4 round recess cut in the back of the box. Then do the same with the lid, When they are put together it forms a 1/2 round groove.
Cut the dowels into equal lengths to match the length of the groove.
Thread the dowel pieces onto the pin dowel.
Mark in the groove the position of each dowel piece, and put a dab of glue on just the lower box groove,every other one.
Put the dowel in carefully so the glue only touches the dowels for the bottom. Put the lid on and clamp closed.
When the glue is dry, remove the lid and put a dab of glue carefully on the lid side of the lid dowels. Carefully locate the lid back in position and clamp. When the glue drys, open the lid.
I can't describe the joy in your heart if the lid opens and is not glued down to the bottom of the box.

These same dowels come with a reamer,(Extra Cost) that is the same pitch as a pencil sharpener for repair of screw holes.
You ream out the buggered screw holes and sharpen a dowel in the pencil sharpener and glue it into the holes. the hole in the center centers the replacement screw.
We used them a lot in hanging commercial doors when the Asian screws would twist off in the oak even with wax lub on them.
http://www.veritastools.com/Products/Page.aspx?p=152
Herb

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 7:54 pm
by OutoftheWoodwork
Wow. Very nice! I'm getting a nice collection of bandsaw box patterns over here... now I gotta get my @$$ to cutting then show Ken

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 8:07 pm
by Stick486
OutoftheWoodwork wrote: Sun Feb 27, 2022 7:54 pm I gotta get my @$$ to cutting then show Ken
yur not gonna show us???
DARN!!!

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 8:10 pm
by OutoftheWoodwork
Stick486 wrote: Sun Feb 27, 2022 8:07 pm
OutoftheWoodwork wrote: Sun Feb 27, 2022 7:54 pm I gotta get my @$$ to cutting then show Ken
yur not gonna show us???
DARN!!!
ROFL You don't want that, Stick. You'll have nightmares for months. You'll need therapy, and you'll never be able to unsee that vision! I won't be the one responsible for putting you through that.

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 8:58 pm
by Stick486
OutoftheWoodwork wrote: Sun Feb 27, 2022 8:10 pm You'll have nightmares for months. You'll need therapy
got laffing so hard I had to go on O2 support...

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 9:06 pm
by OutoftheWoodwork
Stick486 wrote: Sun Feb 27, 2022 8:58 pm
OutoftheWoodwork wrote: Sun Feb 27, 2022 8:10 pm You'll have nightmares for months. You'll need therapy
got laffing so hard I had to go on O2 support...
I speak the truth!

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 9:10 pm
by Stick486
OutoftheWoodwork wrote: Sun Feb 27, 2022 9:06 pm I speak the truth!
okay...
I believe ya...
but that still doesn't keep me from laffing...

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 9:20 pm
by OutoftheWoodwork
Stick486 wrote: Sun Feb 27, 2022 9:10 pm
OutoftheWoodwork wrote: Sun Feb 27, 2022 9:06 pm I speak the truth!
okay...
I believe ya...
but that still doesn't keep me from laffing...
Well don't "laff" yourself into an oxygen tank, honey lol

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 9:25 pm
by Stick486
OutoftheWoodwork wrote: Sun Feb 27, 2022 9:20 pm Well don't "laff" yourself into an oxygen tank, honey lol
Rodger dodger...

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 9:40 pm
by Herb Stoops
I peed my pants....ROTF
Herb

Re: Rustic Band Saw Boxes

Posted: Sun Feb 27, 2022 10:27 pm
by Stick486
Herb Stoops wrote: Sun Feb 27, 2022 9:40 pm I peed my pants....ROTF
Herb
@OutoftheWoodwork ....

now look what ya done did Barb...

Re: Rustic Band Saw Boxes

Posted: Mon Feb 28, 2022 9:03 pm
by OutoftheWoodwork
Stick486 wrote: Sun Feb 27, 2022 10:27 pm
Herb Stoops wrote: Sun Feb 27, 2022 9:40 pm I peed my pants....ROTF
Herb
@OutoftheWoodwork ....

now look what ya done did Barb...
Me?! I'm innocent! All I did was save you thousands of dollars in therapy sessions, and saved you from haunted dreams!

As for Herb, I can't help it if he forgot to empty his bladder before it burst....

Re: Rustic Band Saw Boxes

Posted: Mon Feb 28, 2022 9:20 pm
by Stick486
OutoftheWoodwork wrote: Mon Feb 28, 2022 9:03 pm therapy sessions
therapist aka head bangers are fun...
the last one I had screamed, started spittling/piddling and ran out of their office...

Re: Rustic Band Saw Boxes

Posted: Mon Feb 28, 2022 10:24 pm
by Cherryville Chuck
Herb Stoops wrote: Sun Feb 27, 2022 4:10 pm
These same dowels come with a reamer,(Extra Cost) that is the same pitch as a pencil sharpener for repair of screw holes.
You ream out the buggered screw holes and sharpen a dowel in the pencil sharpener and glue it into the holes. the hole in the center centers the replacement screw.
We used them a lot in hanging commercial doors when the Asian screws would twist off in the oak even with wax lub on them.
http://www.veritastools.com/Products/Page.aspx?p=152
Herb
I have those too. Never used the leadless pencils yet. We don't have too many stripped out screws up here. If in doubt about the provided hardware we pre thread it with a Robertson and then back that out and try the Chinese provided screw. It it looks like we won't get the Chinese one to drive home we reverse it or twist it back out with vice grips and just use a Robertson. Provided we didn't just throw the Chinese one away to start with.

The plugger has other uses too. For example, if you wanted to make dots on the face of a burl clock for the hours you can use the plugger in a DP to drill exact match holes and then carve a wood that will contrast nicely to a near pencil shape and sharpen it in a pencil sharpener, put a tiny bit of glue in the hole (preferably fish glue since it wipes off completely with water) and then shave off flush after.

Re: Rustic Band Saw Boxes

Posted: Tue Mar 01, 2022 12:24 am
by Herb Stoops
That is a good idea Chuck. I have used the reamer and sharpened regular solid dowels for joinery, using butt joints,drill thru both the side and end,while they are clamped together and then put glue in hole, lightly tap in the pointed dowel then cut them off later.
Herb

Re: Rustic Band Saw Boxes

Posted: Fri Mar 11, 2022 6:00 pm
by Nickp
BEEEUUUTIFUL...! ! !

If those are rustic, I'm selling my bandsaw...!

Re: Rustic Band Saw Boxes

Posted: Fri Mar 11, 2022 8:29 pm
by Herb Stoops
Nickp wrote: Fri Mar 11, 2022 6:00 pm BEEEUUUTIFUL...! ! !

If those are rustic, I'm selling my bandsaw...!
Then you will not be able to make them. The idea of band saw boxes to me is the freedom to make them any shape that comes to mind.it brings out creativeness,and originality, there are no limits. you can take a stick of fire wood and make a band saw box, and have it on the back porch with your spare key for the house hidden inside.
Herb

Re: Rustic Band Saw Boxes

Posted: Sat Mar 12, 2022 1:38 pm
by sunnybob
Herb, only just seen this thread. I make shapes, youve made character. :shock:
I've been away from boxes for most of the last year, got to get back to them now youve raised the stakes. :lol:

Re: Rustic Band Saw Boxes

Posted: Sat Mar 12, 2022 2:52 pm
by Herb Stoops
sunnybob wrote: Sat Mar 12, 2022 1:38 pm Herb, only just seen this thread. I make shapes, youve made character. :shock:
I've been away from boxes for most of the last year, got to get back to them now youve raised the stakes. :lol:
I love your boxes.
Herb

Re: Rustic Band Saw Boxes

Posted: Sat Mar 12, 2022 4:20 pm
by DaninVan
Just don't forget why it's there, and chuck it in the fireplace...
Re the high quality dowels in a range of sizes; check out Bear Woods selection...
https://www.bearwood.com/wood-dowel-rod ... owels.html
They're made domestically and very accurate.

Re: Rustic Band Saw Boxes

Posted: Sat Mar 12, 2022 7:37 pm
by Herb Stoops
I have a gas fireplace.
Herb