The Ultimate Flush Trim bit?
Posted: Wed Jan 31, 2024 11:27 am
If this isn't the ultimate in flush trim bits it's in the running. No need to ever replace the body, only the inserts, which are set to give shearing cuts by the way. For the metrically challenged it's about 1 1/4"D by about 2 1/2" cut length with bottom and top bearing. Pretty pricey at $200 plus but you'll never need a new one.
https://spetools.com/en-ca/collections/ ... outer-bits
https://spetools.com/en-ca/collections/ ... outer-bits