Lathe reverse direction
- smitty10101
- Registered User
- Posts: 310
- Joined: Wed Oct 07, 2020 7:09 pm
- Location: South Carolina, USA
- Has thanked: 47 times
- Been thanked: 34 times
Lathe reverse direction
While watching some u tube videos I've noticed that often the person reverses the direction of the lathe while sanding.
Can someone enlighten me as to why?
Seems especially prevalent when turning christmas ornaments.
thks
smitty
Can someone enlighten me as to why?
Seems especially prevalent when turning christmas ornaments.
thks
smitty
I can explain it to you but I can't UNDERSTAND it for you!
Wait a moment, let me overthink it.!
Of course I talk to myself, -- sometimes I need expert advice.
Wait a moment, let me overthink it.!
Of course I talk to myself, -- sometimes I need expert advice.
- Stick486
- CS/TS
- Posts: 20482
- Joined: Thu Jan 21, 2021 7:40 am
- Location: Central Colorado
- Preferred name: Stick486
- Has thanked: 657 times
- Been thanked: 580 times
Re: Lathe reverse direction
throws a lot of the saw dust away from you...
Forget the primal scream, just ROAR!!!
SNORK” Mountain Congressional Library and Taxidermy...
- smitty10101
- Registered User
- Posts: 310
- Joined: Wed Oct 07, 2020 7:09 pm
- Location: South Carolina, USA
- Has thanked: 47 times
- Been thanked: 34 times
Re: Lathe reverse direction
for whatever reason, I feel that there is more to it than that.
My initial thought is that they are trying to knock down the wood fibers to make it more smooth.
The other have of my brain says that it shouldn't matter all that much.
Also, I can't believe that the manufacturers give a rat's a$$ if we get covered with dust.
I can explain it to you but I can't UNDERSTAND it for you!
Wait a moment, let me overthink it.!
Of course I talk to myself, -- sometimes I need expert advice.
Wait a moment, let me overthink it.!
Of course I talk to myself, -- sometimes I need expert advice.
- Nickp
- Site Admin
- Posts: 1374
- Joined: Mon Oct 05, 2020 6:31 pm
- Location: Monroe County, PA
- Preferred name: Nick
- Has thanked: 533 times
- Been thanked: 352 times
Re: Lathe reverse direction
I'm thinking the turning orients the fibers one way and sanding in reverse makes for "mo betta smoothing"...
Don't piss off old people. The older we get the less "Life in Prison" is a deterrent !
- Stick486
- CS/TS
- Posts: 20482
- Joined: Thu Jan 21, 2021 7:40 am
- Location: Central Colorado
- Preferred name: Stick486
- Has thanked: 657 times
- Been thanked: 580 times
Re: Lathe reverse direction
wouldn't that be ''torn'' fibers???
Forget the primal scream, just ROAR!!!
SNORK” Mountain Congressional Library and Taxidermy...
- DaninVan
- Registered User
- Posts: 2371
- Joined: Mon Oct 05, 2020 6:12 pm
- Location: Sunshine Coast, BC, Canada
- Has thanked: 302 times
- Been thanked: 417 times
Re: Lathe reverse direction
When we sand pretty much anything we either do a random orbit or oscillate back and forth, so we really do 'reverse direction'.
I'm guessing that reversing the lathe just replicates what we normally do. Fibres that lay down going in one direction probably get nipped off when reversing?
I'm guessing that reversing the lathe just replicates what we normally do. Fibres that lay down going in one direction probably get nipped off when reversing?
-
- Global Moderator
- Posts: 2648
- Joined: Mon Oct 05, 2020 8:27 pm
- Location: Cherryville, B C
- Has thanked: 561 times
- Been thanked: 1011 times
Re: Lathe reverse direction
I think maybe it's a safety issue. The lathe turning towards you could pull your hand under. The other rotation is away from you and over the work.
- smitty10101
- Registered User
- Posts: 310
- Joined: Wed Oct 07, 2020 7:09 pm
- Location: South Carolina, USA
- Has thanked: 47 times
- Been thanked: 34 times
Re: Lathe reverse direction
But when you're sanding on the lathe your hand & paper are (s/b) UNDER the turned piece and the rotation at that spot is away from you.Cherryville Chuck wrote: ↑Fri Aug 20, 2021 5:03 pm I think maybe it's a safety issue. The lathe turning towards you could pull your hand under. The other rotation is away from you and over the work.
I can explain it to you but I can't UNDERSTAND it for you!
Wait a moment, let me overthink it.!
Of course I talk to myself, -- sometimes I need expert advice.
Wait a moment, let me overthink it.!
Of course I talk to myself, -- sometimes I need expert advice.
- HandyDan
- Forum Moderator
- Posts: 7044
- Joined: Mon Oct 05, 2020 7:44 pm
- Location: Youngstown, Oh
- Has thanked: 378 times
- Been thanked: 372 times
Re: Lathe reverse direction
The best use of reverse on a lathe is the sanding. Wood fibers do lie down anersing the lathe picks them up and helps to break them off. Also you are sanding flat grain and end grain and it is changing as the lathe turns. It is possible to sand an oblong into your bowl and having reverse sanding capability helps to counter that. The end grain is naturally hardest to sand. It still isn't going to sand even but it helps to keep it balanced. Turning in reverse is sometimes helpful too. The use of a set screw to keep the chuck from unthreading in reverse is advised. Check out YouTube for various videos. Power sanding with a drill is also done in both directions.
HandyDan
Youngstown, Oh
Youngstown, Oh
- Herb Stoops
- The Welcome Wagon
- Posts: 3054
- Joined: Mon Oct 05, 2020 8:05 pm
- Location: Auburn WA.,USA
- Preferred name: Raff
- Has thanked: 1484 times
- Been thanked: 876 times
Re: Lathe reverse direction
That is why I don't turn,because I didn't know that, also don't have a lathe.
HErb
HErb
-
- Global Moderator
- Posts: 2648
- Joined: Mon Oct 05, 2020 8:27 pm
- Location: Cherryville, B C
- Has thanked: 561 times
- Been thanked: 1011 times
Re: Lathe reverse direction
I just saw this in my emails, using a block plane to smooth your spindle. It appears that the lathe is turning away from the blade but that must be an optical illusion. It wouldn't cut that way. It looks like Mario is using a version of the Stanley 110 which is a low angle, bevel up block plane. https://www.finewoodworking.com/2021/08 ... -the-lathe
- HandyDan
- Forum Moderator
- Posts: 7044
- Joined: Mon Oct 05, 2020 7:44 pm
- Location: Youngstown, Oh
- Has thanked: 378 times
- Been thanked: 372 times
Re: Lathe reverse direction
The lathe is turning the normal direction. He ended up with a pretty rough surface and started sanding with 100 grit. I wonder why he doesn't just use a skew or skew the plane while cutting. When I do spindles it is common for me to just hit it with some 220 grit and done. The skew leaves a very smooth surface.
HandyDan
Youngstown, Oh
Youngstown, Oh