Sharpening by Hand from LeeValley Veritas...
Sharpening by Hand
Sharpening by Hand
- Stick486
- CS/TS
- Posts: 20493
- Joined: Thu Jan 21, 2021 7:40 am
- Location: Central Colorado
- Preferred name: Stick486
- Has thanked: 657 times
- Been thanked: 580 times
Sharpening by Hand
Forget the primal scream, just ROAR!!!
SNORK” Mountain Congressional Library and Taxidermy...
-
- Global Moderator
- Posts: 2648
- Joined: Mon Oct 05, 2020 8:27 pm
- Location: Cherryville, B C
- Has thanked: 561 times
- Been thanked: 1011 times
Re: Sharpening by Hand
The 8000 and 12000 grit stones aren't out of reach but the 30000 at $500 is. After years of sharpening by eyeball basically I finally broke down and bought the generic $15 honing guide from LV a few months ago. I don't consider it a necessity for chisels because I use them in a skewed position probably more than half the time so whether the end is dead square is not important, only that the edge is sharp. I figure if I can easily shave hair off my arm with them they are sharp enough. Plane irons are a little fussier because they need to be square and uniformly sharp across the edge. The jig makes that a lot easier.
- Stick486
- CS/TS
- Posts: 20493
- Joined: Thu Jan 21, 2021 7:40 am
- Location: Central Colorado
- Preferred name: Stick486
- Has thanked: 657 times
- Been thanked: 580 times
Re: Sharpening by Hand
after years of by eye and a trove of gizmos I got LV's MkII....
major improvements across the board...
major improvements across the board...
Forget the primal scream, just ROAR!!!
SNORK” Mountain Congressional Library and Taxidermy...
- Stick486
- CS/TS
- Posts: 20493
- Joined: Thu Jan 21, 2021 7:40 am
- Location: Central Colorado
- Preferred name: Stick486
- Has thanked: 657 times
- Been thanked: 580 times
Re: Sharpening by Hand
use a sheet of glass or fine glossy stationary...
Forget the primal scream, just ROAR!!!
SNORK” Mountain Congressional Library and Taxidermy...