Coin Banks

All things about methods and technique of turning wood...
This Form is curated by Handy Dan...
Post Reply
User avatar
HandyDan
Forum Moderator
Forum Moderator
Posts: 7051
Joined: Mon Oct 05, 2020 7:44 pm
Location: Youngstown, Oh
Has thanked: 378 times
Been thanked: 372 times

Coin Banks

#1

Post by HandyDan »

This year I decided to make coin banks for the family and some friends. I had saved the tops from some half gallon juice bottles to use for threads so the tops could be removed when the change was needed from the banks. Was quite the undertaking. I wanted each family member to have one including the two new babies added this year. So all in all I needed to make 50 of these. Some are still in the process but 39 of them were given to family at our annual party on Saturday. Everyone liked them.



I turned a straight section on the lower portion the bottle top threads and used epoxy designed for plastic to set them in place. The tops were turned to fit a 1.5" drilled hole and the centers removed. Cut the slot in the tops with a slot cutter on the router table after the blanks were recessed for the tops and still square. Used a wood hand screw clamp to hold them and save my fingers from harm.



I Drilled the bodies with a 1.25", sized the opening to fit the threads used my Easy Wood full size finisher to hollow the bodies under the threads. Their carbide cutter is simply amazing. I have so far hollowed 50 bodies and have yet to loosen the screw and turn the cutter to a new edge and it is still cutting great.
DSC02962.JPG.9c879d93106bc283ba4a0070ade168f2.JPG
DSC02964.JPG.d3ae73f8b7f9559d4c0bbb289596b6f2.JPG
DSC02963.JPG.4c23a1ec026af177ab416387a195c5e4.JPG
You do not have the required permissions to view the files attached to this post.
HandyDan
Youngstown, Oh
User avatar
Stick486
CS/TS
Posts: 20492
Joined: Thu Jan 21, 2021 7:40 am
Location: Central Colorado
Preferred name: Stick486
Has thanked: 657 times
Been thanked: 580 times

Re: Coin Banks

#2

Post by Stick486 »

oh my those are sweet...
Forget the primal scream, just ROAR!!!
SNORK” Mountain Congressional Library and Taxidermy...
User avatar
Nickp
Site Admin
Posts: 1374
Joined: Mon Oct 05, 2020 6:31 pm
Location: Monroe County, PA
Preferred name: Nick
Has thanked: 533 times
Been thanked: 352 times

Re: Coin Banks

#3

Post by Nickp »

Yeowser...! ! ! No wonder the family loved them...!
Don't piss off old people. The older we get the less "Life in Prison" is a deterrent !
User avatar
old55
Registered User
Posts: 257
Joined: Sun Nov 01, 2020 6:56 am
Location: Rockhampton, Queensland, Australia
Has thanked: 190 times
Been thanked: 102 times

Re: Coin Banks

#4

Post by old55 »

Very nicely done Dan.
Ross,
Rockhampton, Queensland, Australia

‘Enjoy the knowledge of others that can be found within.’
Bushwhacker
Registered User
Posts: 826
Joined: Wed Oct 07, 2020 1:53 pm
Location: Clute Texas
Has thanked: 208 times
Been thanked: 333 times

Re: Coin Banks

#5

Post by Bushwhacker »

Great job Dan. You have a wonderful talent.

Bushwhacker
Post Reply